Greetings to all, dear colleagues!
Today we are reviewing a device from Vandy Vape, the
second revision - Pulse AIO.5 Kit.
Link to Pulse AIO.5: Vandy Vape Pulse AIO.5 Kit 80W Box Mod Kit disposable evaporators, in principle, the RBA base is standard for BB and almost any tank can be installed. However, in my opinion, the complete base in terms of the number and location of airflows is far from MTL, rather a hookah, although there is a tightening adjustment. But first things first.
Pulse AIO.5 can be attributed to the category of BB, but this is an all-plastic case, although it is very rich in terms of configuration,
and decently cheaper in price.
The second revision is definitely work on the bugs, then I focus on the changes.
So, Pulse AIO.5 is available in a fairly large range of colors:
2 types of doors are included - plain and with a pattern.
The complete set is really enviable:
Replaceable keypads, as well as doors, are also two - for a square or round button - buttons are included.
The whole kit:
A pair of disposable coils, 0.3 and 0.6 ohm,
wrench for unscrewing the adapter to the drip tip,
hex, blue screwdriver, tank o-rings,
a bunch of screws and o-rings, a couple of coils,
USB Type-C cable, a ladder with holes for cutting coil legs to the required length,
two tanks for one-time evaporators and RBA, instructions and warranty.
The upper mounting hole of the tank has been improved, a drop-shaped holder with a screw has been installed, it is quite reliable:
Adapter - for 510 standard drip-types, drip-types stand up quite tightly, everything is fine here!
Tanks. Executed well, capacity is 5 ml with disposable vaporizers, 3.7 ml for RBA.
Refueling - through a hole with a rubber plug, everything is standard.
There is an air supply adjustment - a plastic nut on the tank connector.
To burn the coil, remove the plastic AFC from the connector and simply screw the RBA base onto any mod.
The dome of the evaporation chamber is oval inside, there are as many as 18 holes for air supply to the coil, the diameter of each hole is about 0.8 mm - well, obviously not MTL.
Screws fastening the spiral - 4, the spiral can be put only one, but it is very convenient - the spiral is put easily and naturally!
The body is made of trustworthy black (in my version) dense plastic. Doors - on 4 powerful magnets, at the bottom of each door there is a recess convenient for removal.
The display is small, but bright enough to show everything you need: installed wattage, coil resistance, charge level, and number of puffs.
Power from 5 to 80 watts.
Board operating modes: VW, VV, TC, BYPASS, Smart.
Charging via USB Type-C, the current declared by the manufacturer is 1A, which is true, and in my opinion, will extend the life of the batteries!
The display of the mod during charging shows the percentage of battery charge, very convenient.
Another important plus is the omnivorous nature of the mod, namely, the ability to use 21700 batteries, and of course 20700 and 18650 with a complete adapter.
It is convenient to insert and remove the battery - there is a slot on the reverse side, the positive pin is spring-loaded brass.
The actual dimensions of the device without a drip-type are 87.1 x 55.9 x 28.5 mm.
The weight of the empty mod is about 138g: The
box is quite heavy, with an RBA base and 21700 installed! However, for my taste - in my hand it is quite comfortable, nothing creaks, does not hang out,
the buttons are executed perfectly, they work with a slight but noticeable click.
I have never used the BB, it will be necessary to get used to the location of the button.
As a summary, for a small budget we get a very high-quality, functional and easily customizable device with the maximum configuration!
Thank you for attention!
