The device comes in a cardboard box with a stylized image kit and logo, on the back of the package there are the names of the manufacturer and device, marking with color, equipment, as well as information about the manufacturer.
The originality verification code can be found on the back of the package.
The package includes: the Drag Nano 2 Kit Nebula Edition device itself; illustrated instructions; usb type-c cable; warranty card; chain; two cartridges with 0.8 and 1.2 ohm coils.
The body of the device is made of zinc alloy and profiled aluminum inserts, which are only available in the Nebula Edition.
In the regular version of the Nano 2, the inserts are made of colored eco-leather. At the top of the deck, there is a slot for a cartridge with a mechanical lock, there are no magnets here, but they are not needed, as the cartridges click well with little resistance and are held quite firmly.
Nearby is a small loop for a lace or a complete chain.
On the front side of the case you will find all the controls. Slider to adjust airflow, 3 LEDs to view battery level, and power/mode button.
At the bottom of the pod, as you'd expect, you'll find a USB Type C charging port. The device only works in automatic puff mode.
Height with cartridge - 73 mm
Height - 50 mm
Width - 44 mm
Thickness - 15 mm
Weight - 70 g
Built-in battery - 800 mAh
Charging current - 1A
Charger connector - USB Type C
Power - up to 20 watts
Cartridge volume - 2 ml
Coils Included - Two VOOPOO VINCI Series V2 Cartridges 0.8 and 1.2 Ohm.
Tightening Control - Automatic
Material - zinc alloy, plastic, aluminum
Drag Nano 2 has a set of all necessary protections.
Against short circuit - yes
From overcharging / overdischarging - Yes
From overheating of the evaporator (cut-off at the 10th second) - Yes
This device works on the Gene chip. Switching occurs with the help of a button, to change the power you need to press three times, and slowly switch the power with a single press - white-20 W, green-14 W, blue-8 W.
Airflow is adjusted by dragging the lever up or down. The hearth is turned on by pressing the button five times.
The Drag Nano 2 Kit Nebula Edition uses VOOPOO VINCI Series V2 Cartridge (2ml) 0.8 and 1.2ohm fixed coil cartridges, which are fully compatible with Replacement Pod and Vinci Pod.
Filling the flask is very convenient, in order to fill in the liquid, it is necessary to remove the top cover under which we will find a filling hole covered with a silicone membrane.
Evaporators convey taste quite well, survivability, as always, will depend on the composition of the liquid, on average - from a week to two.
I'm not really a big fan of these devices, but I'm impressed with the Drag Nano 2 series. It's the perfect pocket device, and since the battery lasts almost all day, it can even be used as a main device.
But I would prefer a pod with replaceable coils, of course due to the cost of maintenance.
You can buy the device in the store - Sourcemore.com
VOOPOO Drag Nano 2 Kit Nebula Edition - $ 19.39 ( With coupon: VDN)
