The Steam Crave Titan PWM Mod V1.5 box mod is a giant 4 * 18 650 user device with 400 + - grams of total weight. At the same time, it is quite simple in terms of filling, just a varivolt with only a decent adjustment range
Previously, I somehow did not come across products from Steam Crave, but it turns out that they have a gigantomastia that is quite similar to itself within the framework of the norm. They have a previous version of this box mod without a V1.5 prefix, with a slightly simpler screen and a simpler “potentiometer” knob, but in general the same wildly large nonsense. And then there is an atomizer 40 mm in diameter and, like, 28 ml of liquid. In a word, tin as it is, and here is its renewal.
Parameter
Dimensions: 110 x 45 x 45mm
Weight: 187g Case
material: metal
Power supply: 4 x 18650
Power output: up to 300W
Voltage range: 0.1 - 8.4V Peak
current: 60A
Operating mode: VV
Supported resistance: unknown
Protection: low / high resistance, against overheating, against short circuits, against reverse polarity, against overcharging
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: monochrome
Micro-USB port / charging: no
Color: see photo below
From the instructions, you can take only that there are all sorts of protections and there are 3 clicks to block the voltage change and 5 more clicks to turn it off.
But you take it out of the box and you are simply amazed at its dimensions.
There was also a small nuance in how to insert the batteries - the cover was on one lock and was made flesh, it did not want to be removed in any way. With the subsequent charging of the cans, the problem is no longer relevant, because they squeeze it out with their weight. But at the first installation, I used electrical tape to extract it while squeezing the latch.
Banks used LiitoKala Lii-HG2 18650 3000mah 30A, traditionally in all vape devices under 18 650. Weight 370 grams with cans and without a tank yet. In total, it will be quite 400 grams.
As a result, the Steam Crave Titan PWM Mod V1.5 device turns out to be practically not transportable in pockets at all, it is possible to carry it in a backpack. I wonder if they will have a device for 4 * 21,700 or for eight cans? Or is it completely stationary and powered from an outlet?
Let me remind you that all control is from a “potentiometer” with a step of 0.1V and frames 1-8.4. The rest of the control is by the button, here the voltage change is blocked by 3 clicks.
Well, before we do some results, let's compare the box mod with the not very small Augvape VX217 kit under 2 * 21 700 (the button is a little annoying, but the autonomy is right) and the FreeMax Maxus kit (I use it in the tail and in the mane, I recently ordered cartridges for him especially).
What can I say Steam Crave Titan PWM Mod V1.5 is definitely an unusual thing, even extravagant in places. It seems to be suitable for lovers of high watts, in order to soar at 150-200, I would prefer a similar config than the standard 2 * 18 650. That is due to autonomy, which is due to security. You can also consider it as a device with maximum autonomy, all the same, 48 + - watt/hours of energy inside.
And let everyone decide for himself whether he is worth the money or not.
