Hello everyone, today I would like to introduce you to a new Starter kit-Vaporesso GTX One.

After a long and endless series of Pods of all types and all brands, finally Vaporesso presents a real traditional Mod with a real traditional 18mm tank in pure MTL style. The GTX One uses GTX coils specifically dedicated to her.

In this version the Axon chipset provides up to 40W of power and supports VW, Smart VW and VV modes.
The Mod uses a built-in battery 2000 mAh with type C. USB
As Gen and Swag2 the GTX One uses the scratch-resistant outer coating.

Enjoy the reading.

The front part of the cardboard box shows the image of the Vaporesso GTX One Kit, on the other sides are reported, the content, specifications, logos, brands, safety hologram, scratch and check and the slogan "The One that leads the many ".

Kit Contents:

1 GTX ONE mod
1 Tank GTX 18 with Pyrex 3ml preinstalled
1 Pyrex parts ( TPD 2 ml)
1 Mesh coil GTX 0.8Ω (12-20W) preinstalled
1 Mesh coil GTX 1.2Ω (7-11W)
4 O -ring
1 USB type C cable.
1 User manual
1 Warranty card

Specifications and Features:

Size: 127.5 × 29.3 × 22.7mm (including the Tank )
Weight (Mod) 83gr
Output: 5-40W
Mode: VW
Mode: Smart VW
Mode: VV
Battery: 2000mAh
Display: 0.69 inch OLED screen E
-liquid capacity: 3ml (standard) / 2ml ( TPD ) Coil
options: GTX range Adjustable airflow USB 2A Type-C charging

How it's made:

The GTX One is made of zinc alloy, and anti-scratch / anti-slip material that covers about 3/4 of the entire surface.

The metal parts of the frame have a mirror shine that easily attracts fingerprints, the round Fire key is made of plastic material, under it we find the 0.69 "OLED screen, the Up and Down keys are arranged vertically and are made of stainless steel, below we find the USB-C charging socket.

The rear profile is entirely covered with scratch-resistant material, in the lower part we find the Vaporesso logo.

At the top of the mod, the cup can accommodate 22mm atomizers with no protrusion, the 510 attachment thread is well crafted, the pin is spring loaded and gold plated.

The base on which the GTX One rests shows the vent holes of the cell, the disposal logo, the CE mark, the geographical indication of production and the indication on the capacity of the integrated battery (2,000mAh).

On the top and bottom of the device there are two torx screws that hold the kit together.

How the GTX One works:

To turn on / off the Mod you need to make five clicks on the fire button.
To lock/unlock the Mod you need to make three clicks on the fire button.
In VW mode, the power is adjustable from 5 to 40w with an increase/decrease of 0.1W at a time (slow), or by holding up / down of 1w at a time (fast).
The maximum power output limit is 40w. Trying to go further, the message "Max Power" appears on the screen.
To rotate the screen 180 ° you need to press the fire / Up buttons together.
To access the menu (mod unlocked), keep the Up / Down keys pressed together to scroll through the VW / VW Smart / VV modes press Up or Down. To confirm or change one of these modes, keep the fire button pressed.

Protections:

-Overtime protection: This message appears on the screen and delivery stops when the puff reaches a continuous vape time of 10s.

-Low Atomizer protection: This message appears on the screen and the delivery stops when the device detects too low a resistance.

-High Atomizer Protection: This message appears on the screen and the delivery stops when the device detects too high a resistance.

-Check Atomizer Protection: This message appears on the screen when the atomizer is not detected, the device is not working.

-Short Atomizer Protection: This message appears on the screen and delivery stops when the device detects a short circuit.

-Low Battery Protection: This message appears on the screen when the battery voltage becomes too low and it is no longer possible to vape.

- Low Power Protection: This message appears on the screen when the battery voltage is extremely low, the device stops supplying.

-Overcharge protection: During the charging phase the device cuts off the power supply when it is fully charged.

-USB Input Protection: When the USB detects an input voltage higher than the nominal one, the device stops the charging process.

Tank GTX 18:

The Tank is made entirely of stainless steel and Pyrex, the 510 drip tip is in delrin.

The maximum diameter with the Pyrex bubble / 3ml) reaches 22 mm. With Tpd glass (2.0ml) the maximum width is 18mm. The height with both configurations reaches 30 mm.

Note: the TPD version comes with two 2ml Pyrex.

The bottom of the atom has a slightly protruding pin, it bears the geographical indication of production, the product name, a serial number, the CE mark and the disposal logo.

Once the top cap has been unscrewed, we do not find any refill slots, this makes the operation very simple.
Note: Be careful not to over tighten the top cap as it may be difficult to unscrew.

Once the base has been disassembled, the GTX coil can be inserted/removed with the convenient push and pull system.
The airflow is completely partializable, the ring nut can adjust the small holes 5 present on the basis of the atomizer from MTL restricted to MTL opened.

The coils :

The kit includes two coils, a GTX 0,8Ω Mesh (12–20 W) (pre-installed) and a GTX 1.2Ω MESH (7-11 W), separately other two coils can be purchased, one for the sub-ohm GTX 0.6Ω Mesh (20–30W) and one for MTL GTX 1.2Ω regular (8-12 W).

I also installed several 22mm tanks on this GTX One, they don't stick out at all.

Final thoughts:

The chipset of the GTX One is very responsive to the fire button, for a starter kit like this I find it acceptable that it is equipped with only three modes ( VW - Smart VW ) so as not to complicate life too much for new vapers.
Smart VW mode (if activated) sets each GTX Coil to the best wattage, this is also a valuable aid for newbies.

The management of the 2,000mAh battery with the coils from 1.2Ω to 10 / 11W allows you to cover the whole day abundantly. The complete recharge takes about 50 minutes. The small 0.69-inch OLED screen has good brightness and the necessary information it reports can be read easily.

Vaporesso has extended the scratch-resistant material also to the GTX One, this gives it the same tactile feedback of grip and softness as the other mods such as the Target2 and the Gen. To give a touch of strength, zinc alloy was also used and this too I like it alot. Its shape and low weight make it very manageable.

Overall the construction materials are good, even for the GTX 18 tank which is made entirely of stainless steel with a delrin 510 drip tip in pure MTL style.

For the GTX One test with the various coils I used a 50/50 hazelnut liquid.

- Coil GTX 0.6Ω Mesh (20-30W) sold separately.
Designed for a Restricted Flavor with completely open air flow, I find it balanced if used between 20 and 24w, going beyond it is not convenient due to the limited air flow to the MTL puffs of this atom, as aromatic yield is equal to 0.8, the volume of steam generated is consistent and never too hot. In terms of battery consumption it is the least indicated.

- Coil GTX Mesh 0,8Ω (12-20W) included in the kit.
The best performance for this coil is between 15 and 20W with the air flow wide open, I think it is much more suitable than the previous one because I find the performances very similar, naturally to the benefit of the battery life.

- Coil GTX 1.2Ω Regular (8-12W) sold separately.
This is not my favorite of the GTX coil batch. However, it manages to produce surprisingly a lot of steam in relation to the approximately 10W usually used, moreover the consumption of liquids/battery is really negligible.

- Coil GTX Mesh 1,2Ω (7-11W) included in the kit.
The best performance for this coil is between 9 and 11W with the partialized air flow (1-3 holes) the aroma for my hazelnut is faithful, the steam production is discreet and tending to grease (as I like it) the vape it is never too hot, but not too cold, this is a coil that also consumes very little liquid and battery.

I liked this starter kit and recommend it. I find it to be a great easy to use MTL device for new vapers who want to ditch traditional cigarettes.

Pros:

Design
Handy compact and lightweight
Build quality Quality
materials for a starter kit
Fire reaction time
Smart VW mode
Display brightness
Excellent battery life
Fast battery charging
Safety protections Life
of GTX coils
GTX Coil Push and Pull 3ml bubble
tank
Air regulation with optimal yield for MTL
Low consumption of e-liquid

Cons:

The unscrewed top cap is slippery.