The Dead Rabbit V2 RTA by Hellvape is a 25 mm dual coil atomizer contained in an orange box with a window that allows us to see the RTA and with the logo and the name of the brand and that of the atomizer printed.

Inside we find the Bubble Glass, which allows you to go from 2.0 to 5.0 ml of capacity, the user manual (also in Italian), a screwdriver, an Allen key, gaskets and spare screws with Allen head.

Aesthetic and functional aspect:

Aesthetically very simple but with very well executed and pleasant processing on the two Cups, which also guarantee a decent grip.

The Top Cap opens by sliding with a good contrast that does not allow accidental opening and can also be unscrewed to be able to disassemble the airflow control ring and to eventually replace the gasket in the upper part of the chamber.

Drip Tip 810 in black color, quite thin and low.

Two bells, the external one with the unmistakable "Dead Rabbit V2" logo engraved and the internal one with a honeycomb airflow in the upper part and two large openings in the lower part.

Postless deck that follows the shape of the Dead Rabbit V2 RDA.

On the bottom there is a transparent plastic insulator, which in addition to insulating from the heat should also act as a protective ring so as not to damage the Mods.

Dual coil 4.5 turns Tri-Core Fused Clapton 28 * 3 + 40 on 3 mm tip.

Final remarks:

It is necessary to make some considerations on the main differences with the previous version:

- Similar aesthetics with wider and narrower airflows and a little more slender.

- Increased capacity with Bubble Glass and the presence of a PC insulator on the bottom of the atomizer,

- Internal honeycomb airflow with double bell.

- Deck of the RDA V2, which apart from the larger square section tightening holes and two sides that should hold the cotton in place when the bell is screwed, is nothing more than a stylistic exercise and essentially does not differ from nothing from that of the previous version.

Drip Tip with the same internal hole, but lower and thinner than the previous one (too low).

Aesthetically I find it very pleasant and well built, better than the previous one.

Easy to build, it feeds very well with a smooth shot and good yield similar to the previous one, in line with other similar products.

Thank you for reading!