The Hellvape company gained the greatest publicity thanks to the Rabbit series atomizers. It is impossible to count exactly how many rabbits are in the company's portfolio.
Because they breed, in an intimidating dullness, just like rabbits.
Dead Rabbit M RTA was created in collaboration with Vapers Brazil. The atomizer has an upper air inlet and uses mesh plates, hence
the magical M in the name of the atomizer. Of course, for slightly more manually gifted people, it is also possible to install an ordinary
heating spiral. While this is not a simple task, it works very well.
The appearance of the rabbit does not sin, although it is probably one of the recognizable signs of all rabbits. It reminds me of Zeus X, due to the lower part of the atomizer.
The Vapers Brazil logo to the untrained eye may also resemble those of Zeus.
The capacity with an ordinary glass is 3 ml and with a bulb glass 4.5 ml.
Due to the nature of the evaporator, you will have to refill it several times a day.
Fortunately, we have a quick top-up, just over a quarter of a turn is enough to remove the top lid of the atomizer. Contents of the package:

Dead Rabbit M RTA atomizer
Spare glass
4 x Pieces of cotton
2 x 0.15 ohm plate SS316L
2 x Lamella 0.25 ohm KA1
A screwdriver also used to bend the plates
A pack of accessories: o-rings, screws and a spare spring
User manual

Building on a rabbit is not much of a problem. People who got acquainted with Profile Unity will find themselves here like Magda in the fridge.
The atomizer uses the same construction based on a ceramic plate that presses the cotton to the mesh from the bottom.
Quite annoying is the fact that the screws are quite short and you have to be really careful when unscrewing them.
It is best to unscrew only as much as is needed to insert the plate. The case looks a bit worse when attaching normal
heaters. In this case, it is not difficult for the screw to happily jump out and show us the middle finger in flight, while
rolling somewhere in the nooks and crannies under the dresser. It was during the installation of an ordinary heater that such an incident happened to me.
Fortunately, a neighbor who has eyesight like a falcon came to the rescue. After a dozen or so minutes she managed to find this little
sucker, she also found the screw. There are no problems with the transport of the atomizer, at first I struggled only with a slight
over transport, although the problem was due to my mixes, which are in the proportions of 50 VG / 50 PG.
I managed to get it under control by using a bit more media. In terms of taste, the rabbit works well, although I am not
a fan of the huge clouds that these types of atomizers generate. It was with great pleasure that I used Rabbit.
The work culture after installing a regular heater (three-core clapton) turned out to be a big surprise.
While similarly in every atomizer of a similar design you can mount a simple spiral,
it does not always work as well as here. In Profile I fought on this field and I fell mercilessly.

I consider the atomizer to be successful, but I will not hide it in any way, mesh is not my thing.
Although maybe that's a good thing. This shows that even people who do not have contact with such
constructions on a daily basis will find themselves here without any problems. Thanks to this, they will be able to slowly start
their adventure as mobile smoke generators and earn extra money at discos.