GeekVape Zeus X Mesh RTA

A test of the Zeus X Mesh RTA by GeekVape:

GeekVape Zeus X Mesh RTA

After the famous Zeus, here is the Zeus X Mesh RTA manufactured by GeekVape. It is a rebuildable tank atomizer. It is 25 mm in diameter. It has a tray fitted with two posts with clamps intended to accommodate a mesh sheet.

This material is supposed to have a longer lifespan than conventional coils and is renowned for the incomparable flavor restitution it offers to its users. It is fitted as standard with a 4.5 ml bubble reservoir. 

The main technical characteristics of the Zeus X Mesh RTA by GeekVape

  • Brand: GeekVape.
  • Origin: China.
  • Dimensions: 40 x 25 mm.
  • Screw thread: 510.
  • Type of atomizer: RTA.
  • Inhalation: direct
  • Mounting type: Mesh.
  • Plate: postless, with clamps.
  • Tank capacity: 3.5 ml or 4.5 ml.
  • Materials: Pyrex, stainless steel.
  • Drip tip: 810 (or 510 with the adapter provided).
  • Airflow: adjustable.
  • Air inlets: from above.
  • Filling: from above.
  • Compatible Bottom Feed: no.
  • Available colors: Black, Blue, Gold, Green, Gunmetal, Rainbow, Red & Black, SS, Wine red.


Unpacking the Zeus X Mesh RTA by GeekVape:

GeekVape Zeus X Mesh RTA

It arrives in a cardboard box! It is quite massive and characteristic of the products of this brand. Let's see without delay and as soon as possible what it contains, because it is well stocked.

 

The contents of the Zeus X Mesh RTA by GeekVape:

GeekVape Zeus X Mesh RTA

  • A Zeus X Mesh RTA atomizer.
  • An adapter for 510 drip tip.
  • A 3.5 ml “straight” Pyrex tank.
  • An Ultem drip-tip.
  • Two mesh sheets in Kanthal A1 (18 x 6.2 x 0.1 mm; 0.2 Ω).
  • Two Ni80 mesh sheets (18 x 6.2 x 0.1 mm; 0.17 Ω).
  • Four cotton laces.
  • A bag of spare parts (replacement seals and replacement hardware).
  • A multifunction key.
  • A tool to round the mesh.
  • A user manual.


I give you a magnificent view of the Zeus X Mesh plateau. We see, of course, the two clamps that will trap the mesh sheet. But we see, above all, a white stud in the middle which is mounted on a spring and which will allow the cotton to be in permanent contact with the mesh. Ingenious system, isn't it?

GeekVape Zeus X Mesh RTA

While you revel in this photo of sublime and incomparable beauty, I run away and I start to ride the Zeus...


The assembly of the Zeus X Mesh:

I start by pinching one side of the mesh sheet. I chose to test the Ni80 first. Don't ask me why, I have no idea. I let fate choose.

I then put the template provided and I could give the mesh the desired shape. Afterwards, I was able to trap the mesh sheet in the second clamp. The operation is very simple.

GeekVape Zeus X Mesh RTA

We now have to cotton the beast with one of the huge cotton laces provided by GeekVape. They are very very thick, it hardly passes but it passes. We cut a little more than at the bottom of the tray, we fold and soak generously!

GeekVape Zeus X Mesh RTA

It only remains for me to go up the ato to fill it and finally taste greedily my favorite macerate.

Before going to the tasting, I will give you a little tip for the assembly. Don't do like I just did! It should rather and simply take his mesh sheet and round it on the template provided for this purpose as preliminaries. In three seconds, she was in good shape. Then, just place it on the plate, in the two clamps. Finally, we screw and it's over. It's faster and more precise. I taste now !!!


The Vape of the Zeus X Mesh:

I set the box to 35 W and I send. Cow is good! I take big flavors in the truffle and I spit out a big white cloud. It is delicious!


The problem


But it lasts a dozen bars and suddenly it's a tragedy: a big dry-hot from behind the bundles… What a horror! What did I do to deserve this? I had to cotton the bouzin like an acorn. Come on, I reopen the beast and I start again. Not once the pirates, but seven times! Dry-hit on dry-hit ... I never give up, it is too good this ato, from what I could glimpse. This is how after having literally screwed up 3 laces and 3 cotton pads, I managed to cotton it! I took out my V2 bacon. I stuffed a good piece of it under the mesh. I cut a hair more than flush with the tray. I have ventilated the cotton wicks well. I cut these into an arrow shape.


The solution

 

I think that despite the stud on the spring, my cotton was not making enough contact because I did not think of reassembling the cotton wick on both sides once it was in place. The stud works so that the cotton touches the center of the mesh sheet. Also think about zamis!

Problem fixed! Now we can have fun!

No need to make boxes, this atomizer is not necessarily easy to implement because you have to be very precise with the cotton, but it is very good. Mesh is something else. The Zeus is leak-proof, tasty and can take in watts without flinching. It's good tasty DL! And if we close the airflow a bit, it is a marvel of sweetness and delicacy for the palate ... He only asks to continue. When I take it, I never let go and it pumps and it pumps ... No more dry-hit, no heating, only waffle steam and the taste you want!


My opinion on the Zeus X Mesh RTA by GeekVape:

To conclude, I think this atomizer has a lot of qualities:

a super well designed tray,


super fast assembly,
very easy and quick filling,
good manufacturing quality,
a pretty cool look,
and a very very pleasant vape.
I add that I did not feel a significant difference between the two types of mesh: KA1 or Ni80. In this regard, these are announced at 0.2 and 0.17 ohm respectively. At home, the first is measured at 0.23 ohm and the second at 0.22 ohm. Not enough to do with drama, but I had to tell you.

Last thing! I tried to cotton this monster again! And, once you know the secret, it rolls on its own and it works well . My little two day old homemade Hooch is delicious