Hi, today let's check out the GeekVape H45 Classic Kit sent to me by @sourcemore online shop. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.
► GeekVape H45 Classic; Before starting, let's see together some special features indicated by the manufacturer:
• 1. Powerful and robust, light and fluid
• 2. New Tri-proof design, IP68 protection degree
• 3. Integrated 1400mAh battery with 45W max
• 4. Technology Stable output buck boost
• 5. Leak-proof design with superior airflow
• 6. Suitable for H45 cartridge and B series 0.4Ω/0.6Ω coils
► GeekVape H45 Classic; Packaging:
The box in the classic black/orange colors shows an image of the device contained inside on the front. On the back are listed; some of the main features, the contents of the package, the manufacturer's addresses, logos & certification marks and the QR-Code for verifying authenticity.
► GeekVape H45 Classic; Packing List:
• 1* GeekVape H45 Classic Mod
• 1* GeekVape H45 Pod (4ml)
• 1* USB Cable (Type-C)
• 1* GeekVape B 0.4Ω Coil
(Pre-installed, 25-35W) • 1* GeekVape Coil B 0,6Ω (spare, 15-25W)
• 1* Coils tool
• 1* Spare MTL Drip Tip
► GeekVape H45 Classic; Specifications:
• Product size: 44.8x30x92mm
• Built-in battery capacity: 1400mAh
• Charging port: Type-C
• Output power: 5W-45W
• Mode: VW /Bypass
• Screen: 0.96 inch TFT
• Temperature Operating Range: 10℃~45℃
• Tank Capacity: 4ml
• Top Fill
• Resistance Range: 0.1Ω~2Ω
• Drip Tip: 510 RDL + 510 MTL Spare
• Compatible With: GeekVape H45 Cartridge and GeekVape Coils B Series 0.4Ω/0.6Ω
► GeekVape H45 Classic; Available Colors:
• Lavender
• Sakura
• Aqua
• Blue
• Gray
• Black
► GeekVape H45 Classic; First Impressions:
The Geekvape H45 Classic Hero 3 is a small Pod Mod device that is 15% lighter than the previous generation, yet another version of the Aegis maintains a close aesthetic bond with its predecessors. Surely the remarkable structural strength with a new Tri-proof design are among its best features. The upper airflow is a guarantee to avoid leaks, while to keep the maximum power of 45W under control, the geekvape technicians relied on an internal high-density battery with 1.400mAh capacity, this battery during the test was able to give me 250 puffs at constant 25W.
Geekvape H45 Classic turns out to be a rather compact and really handy device, moreover, its IP68 protection degree makes it resistant to water and dust thanks to a particularly accurate coating of silicone mixed with smooth leather pieces. The metal armor gives the Aegis Hero 3 a high level of impact resistance even when used in the harshest environments.
On the front are the power button (top), the "+" and "-" adjustment buttons (bottom) and the underlying USB-C socket for recharging. The screen design is the fascinating one we all know, substantially unchanged, sharp and well colored. On the display you can read; running mode, selected power, ohms , amperes, volts, puff counter. The operation guide is as follows:
• 5 clicks to turn on/off the device.
• With the screen unlocked, use the "+" and "-" keys to adjust the power from 5 to 45W in 0.5W increments/decrements.
• With the screen unlocked, click 3 times on the fire key to access the menu, to choose the mode use the "+" and "-" keys, use the Fire key to confirm your choice.
• Puff Clear: With the screen unlocked, click 3 times on the fire key to access the menu, to choose the mode use the "+" and "-" keys, use the Fire key to confirm your choice.
• Lock/unlock buttons: Press the "+" and "-" buttons simultaneously to lock/unlock power regulation. You can also lock/unlock the Fire key with 3 more clicks.
• Stealt mode: in the standby state, press the "+ and -" and Fire keys simultaneously, repeat the operation to exit the invisible state.
• Theme color change: 3-click the Fire button, then press the "+" and "-" keys simultaneously
• Screen brightness: Press the Fire and "+" keys simultaneously to increase brightness. Press the Fire and "-" keys at the same time to decrease the brightness.
• Reset to factory settings: When the device is off, press the "+" and "-" keys simultaneously, the screen will display the firmware number, then press all keys simultaneously to restore the factory settings.
According to Geekvape the chipset equipped with "Buck Boost Tech" constant output system optimizes the wattage to ensure an even flavor that meets all your needs even when the battery is low.
As I wrote previously, the Mod consists of leather parts and silicone parts, the soft silicone part also extends on the bottom of the Mod giving it a good grip and a soft support on the surfaces, moreover the base is wide enough to keep the device an excellent vertical balance even during the recharging phase.
The compartment/pod is shaped and follows the profile of the cartridge producing a good fit with it, furthermore on the bottom of the compartment there are two magnets which exert a good attraction force with respect to the cartridge. Also on the bottom are the spring-loaded, gold-plated electrical contacts.
► GeekVape H45 Cartridges:
Intelligently Geekvape has made this cartridge so that it is interchangeable between H45 Classic and H45 providing an undoubted advantage to the final consumer.
The H45 cartridge is supplied with two spare coils, a 510 RDL drip tip, a 510 MTL drip tip and a metal tool to facilitate the extraction of the coils.
The transparent part of the H45 cartridge is positioned higher than the mod and this makes the liquid level inside the tank more easily visible. The cartridge is also equipped with an adjustable upper airflow with a rotating ring having limit stops. This top entry solution is leak proof and designed to maximize flavor yield when paired with B-series coils.
By lifting the silicone cap you can easily insert up to 4ml of e-liquid inside the cartridge. The coil is inserted from the bottom into the cartridge with a slight pressure, taking care to fit it in the correct way so as not to have problems with liquid leakage.
► Geekvape B Series Coils:
The package of this kit includes two specific coils for the H45 Classic device and its power range. The B-Series Coils are equipped with 3 O-rings for optimal leak tightness, the information (Watt Range) is written on the bottom, this allows you to easily identify the characteristics and the range of use of each of them even without glasses.
► GeekVape H45 Classic; Final conclusions:
For the vape test I prepared one of my favorite liquids with 10ML Hypnos TOB concentrated aroma diluted 10% in a VG - PG 50/50 solution with 1.5mg/ml boost.
• Geekvape B Series Mesh - Coil from 0,6Ω Range 15-25W:
With this Mesh - Coil after having initialized it and after waiting 5 minutes for the breathable material to become saturated with liquid, I was able to observe that it is able to start at full capacity immediately and without strange tastes of cotton. The Coil activates quickly even at 15W and pushes well. However, it is from 20W upwards that it is best expressed. I find it well balanced between heat emitted, aromatic yield and steam production. One of the advantages of H45 Pod with this Coil is that it never heats up and the vapor always remains fresh, it does not heat up even after long and intensive use. With this coil in combination with the 510 Drip tip you get excellent MTL performance by reducing the airflow. The Puff is fluid even with AFC completely closed.
• Geekvape B Series Mesh - 0.4Ω Coil
Range 25-35W (pre-installed): Personally I find this resistor perfect for the H45 cartridge in combination with the wide 510 Drip tip for RDL. The coil is ready immediately and without strange flavors. At 25W with AFC open at 50%, it emits a nice dense and copious vapor. This resistance enhances the notes of dried fruit, whipped cream and banana present in my liquid, making it difficult for me to detach myself from the Vape. By playing with the AFC and Watt settings, the tank it never gets excessively hot (at least for me). The consumption of liquid is quite high and this makes it necessary to fill the cartridge often but it is a quick operation that I am happy to do completely captivated by these excellent performances.
As far as the device is concerned, there are no malfunctions to report, I think this H45 Classic really represents an excellent choice for those looking for excellent performance and finishes in a Pod Mod, with truly unparalleled robustness.
